Precise 3-Axis Digital Read-Out and Glass Scale Encoders

General Functions:

• Inch/mm Conversion.
• Zero Reset. ]
• Preset Dimension.
• 1/2 Distance Mode to aid Centre Finding.
• Absolute and Incremental coordinate display modes.
• Recall Memorized Position.
• Mechanical Zero & Workpiece Zero.
• Shrink Function: Shrinkage allowance can be set to compensate for casting or moulding shrinkage.
• Pitch Circle Diameter (PCD) Function: The console will output X and Y coordinates for each hole.

Calculator Functions:

• Math Functions: Add, Subtract, Multiply, Divide.
• Trig Functions: SIN, COS, TAN, SIN-1, COS-1, TAN-1, X2, v, p (pi).
• Axis position can be transferred to calculator as an operator.
• Result can be transferred back to an axis.

Functions for Milling Machines and Lathes

• Tool Compensation and Tool Number.
• Diameter or Radius Reading.

Display Console Specifications:

• Resolution: .0002″/0.005mm (5 Microns).
• Display: 8 Digit LED.
• Response Speed: 60m/min.
• Error: 1 Count.
• Power: 110-250VAC 50-60Hz.
• Operating Temperature Range: 0-40. Supplied with mounting arm. Connector: 7 pin DIN (screw locking)
• .0002″/.005MM RESOLUTION
• 3-Axis Display

Precise Glass Scale Optical Encoders

• Grating Pitch: 0.001″/0.02mm
• Accuracy: .0005″/0.01mm (200C1000mm)
• Reference Marks: 1 ref. mark every 2″/50mm
• Max Traversing Speed: 60m/minute
• Output Signal: TTL
• Connector: 7 pin DIN (screw locking)
• Operating Temperature: 0-45.
• .0002″/.005MM RESOLUTION
• IP 53