Mitutoyo Digimatic Indicator for Bore Gage Applications – 543-312B

• The new Bore Gage-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
• Parameter setting software makes it easy to set all available parameters. (optional)
• Fast measurement frequency allows the user to increase the number of readings per second from 10 to 50.
• The minimum value holding function provides the easy detection of hole diameter.
• An analog bar indicator is integrated to enhance the intuition in reading.
• Go/no-go judgment is performed by setting the upper and lower tolerances.
• Up to three sets of master values and upper/lower tolerance values can be memorized.
• Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle Absolute Position from the origin when turned on.
• Stem dia. 3/8″ #4-48 UNF Thread

Technical Data

Resolution: 0.001-0.01mm or.00005-.0005/0.001-0.01mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Unlimited
Measuring force: 1.5N or less
Battery: CR2032 (1 pc.), 05SAA217
Battery life: Approx. 12 months under normal use
IP Rating: Equivalent to IP-42*1
*1 A protection class indication (IP=lnternational Protection) is based on the IEC 60529 /DIN40050 part 1/JIS D0207, C0920. The level indicated is valid only if the output connector cap is installed.

Function

Key Lock, Parameter Lock, PC-USB Input, Analog Bar, Fast measurement frequency, Preset (up to 3 values), Tolerance Judgment , Peak Detection (Min Only), inch/mm conversion (on inch/metric models only), Data Output Alarm: Low voltage, Counting value composition error, Overflow error, Tolerance limit setting error.

Optional Accessories

905338: Connecting Cable (1m)
905409: Connecting Cable (2m)
21EZA313: Parameter Setting USB Cable

See all Mitutoyo ABSOLUTE Digimatic Indicator ID-C, Series 543, Specially Designed for Bore Gage Application