Welcome to Our Store

Hardware
Dotco 15LF Series Light Duty Head Right Angle Drill, 750 RPM – 15LF286-62
Dotco 15LF Series Light Duty Head Right Angle Drill, 750 RPM – 15LF286-62
$1,495.00 $148.00
Dotco Replacement Carbide Point Stylus – 1018081
Dotco Replacement Carbide Point Stylus – 1018081
$119.95 $59.98
Drake Single Leverage Arbor Press – 901006
Drake Single Leverage Arbor Press – 901006
$1,195.00 $147.00
Dremel 1 Diam x 1/8 Thick Unmounted Buffing Wheel 1 Ply, Polishing Wheel, 0.07 Arbor Hole, Hard Density 425-02 – 92656172
Dremel 1 Diam x 1/8 Thick Unmounted Buffing Wheel 1 Ply, Polishing Wheel, 0.07 Arbor Hole, Hard Density 425-02 – 92656172
$9.72 $7.78
Dremel 1 OD, 1/8 Shank Diam, Straight Filament Nylon Wheel Brush 1/16 Face Width, 1 Trim Length, 15,000 RPM 538-02 – 92656206
Dremel 1 OD, 1/8 Shank Diam, Straight Filament Nylon Wheel Brush 1/16 Face Width, 1 Trim Length, 15,000 RPM 538-02 – 92656206
$17.97 $14.38
Dremel 1-1/2 x 0.045, Cutoff Wheel Reinforced, 35,000 Max RPM, Use with Angle Grinders EZ456 – 52466836
Dremel 1-1/2 x 0.045, Cutoff Wheel Reinforced, 35,000 Max RPM, Use with Angle Grinders EZ456 – 52466836
$23.85 $19.08
Dremel 1-1/4 x 0.045, 1/8 Hole Cutoff Wheel Reinforced, Use with Angle Grinders 426 – 09023847
Dremel 1-1/4 x 0.045, 1/8 Hole Cutoff Wheel Reinforced, Use with Angle Grinders 426 – 09023847
$18.52 $14.82
Dremel 1/16 Cut Diam, 1/8 Shank Diam, Single Cut Cylinder Burr Flat End 113 – 09023284
Dremel 1/16 Cut Diam, 1/8 Shank Diam, Single Cut Cylinder Burr Flat End 113 – 09023284
$6.92 $5.54
Dremel 1/2 Diam 1/8 Shank Nylon Fill Cup Brush Crimped Wire, 15,000 Max RPM 404-02 – 92763291
Dremel 1/2 Diam 1/8 Shank Nylon Fill Cup Brush Crimped Wire, 15,000 Max RPM 404-02 – 92763291
$20.20 $16.16
Dremel 1/2 Diam Brass Flat Faced End Brush 1/8 Shank Diam, 15,000 Max RPM 536-02 – 92763374
Dremel 1/2 Diam Brass Flat Faced End Brush 1/8 Shank Diam, 15,000 Max RPM 536-02 – 92763374
$13.20 $10.56
Dremel 1/2 Wide x 1/4 Diam, Spiral Band Drum 1/8 Shank Diam, 15,000 RPM 430 – 09024647
Dremel 1/2 Wide x 1/4 Diam, Spiral Band Drum 1/8 Shank Diam, 15,000 RPM 430 – 09024647
$9.92 $7.94
Dremel 1/4 Cut Diam, 1/8 Shank Diam, High Speed Steel Single Cut Tree Burr with Radius Radius End 117 – 09022997
Dremel 1/4 Cut Diam, 1/8 Shank Diam, High Speed Steel Single Cut Tree Burr with Radius Radius End 117 – 09022997
$35.23 $28.18
Dremel 1/8 Cut Diam, 1/8 Shank Diam, Carbide Double Cut Cylinder Burr Flat End, 9/32 LOC 9901 – 09023102
Dremel 1/8 Cut Diam, 1/8 Shank Diam, Carbide Double Cut Cylinder Burr Flat End, 9/32 LOC 9901 – 09023102
$18.97 $15.18
Dremel 3/16 Diam, Medium Aluminum Oxide Coated Mounted Flap Wheel 1/8 Shank Mount, 80 Grit 504 – 06633143
Dremel 3/16 Diam, Medium Aluminum Oxide Coated Mounted Flap Wheel 1/8 Shank Mount, 80 Grit 504 – 06633143
$14.13 $11.30
Dremel 3/32 Head Diam, Sharp Tip Point End, Diamond Mounted Point Teal 7144 – 90606393
Dremel 3/32 Head Diam, Sharp Tip Point End, Diamond Mounted Point Teal 7144 – 90606393
$14.22 $11.38
Dremel 3/4 Diam, 180 Grit Aluminum Oxide Fiber Disc Very Fine 411 – 09023946
Dremel 3/4 Diam, 180 Grit Aluminum Oxide Fiber Disc Very Fine 411 – 09023946
$8.85 $7.08