Mitutoyo ABSOLUTE Digimatic Indicators ID-C Series 543, Standard Type

Features:

• Similar in size to Series 2 dial indicators
• As compact as standard Series 2 dial indicators
• Large, easy-to-read LCD
• GO/NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/NG) can be displayed in full-size characters.
• The positive/negative count resulting from the spindle’s up/down movement can be toggled
• Internal calculations using the simple formula of [F(x)=Ax)] are available
• Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle “Absolute Position” from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
• The ID-C indicator face can be rotated 330 to an appropriate angle for easy reading
• With SPC data output

Technical Data:

Accuracy Refer to the list of specifications. Resolution 0.01mm, 0.001mm, .0005″/0.01mm, .0001/0.001mm or .00005/0.001mm Display LCD Length standard ABSOLUTE electrostatic capacitance type linear encoder Max. Response speed Unlimited Measuring force Refer to the list of specifications

Low Measuring Force Models:543-395,543-395B,543-396,543-396B,
543-405,543-405B,543-406,543-406B Battery SR44 (1 pc.), 938882 Battery life Approx. 5,000 hours under normal use Dust/Water protection level IP42 or IP53 (dust-proof type)

Function:

• Origin-set/Preset, Zeroset, GO/NG judgment, Counting direction switching, Power ON/OFF, Data output,inch/mm conversion (on inch/metric models only)
• Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error
• Internal calculations using the simple formula of [F(x)=Ax)] are available

Optional Accessories:

• 905338: SPC cable (40″ / 1m)
• 905409: SPC cable (80″ / 2m)
• 21EZA198: Spindle lifting lever (ISO/JIS type)*
• 21EZA199: Spindle lifting lever (ANSI/AGD type)*
• 21EZA105: Spindle lifting knob (12.7mm/5″ISO/JIS type)**
• 21EZA150: Spindle lifting knob (12.7mm/5″ ANSI/AGD type)**
• 21EZA197: Spindle lifting knob (25.4mm/1″,50.8/2″ models)
• 21EZA200: Spindle lifting knob (50.8mm/2″)
• 540774: Spindle lifting cable (stroke: 1″/25.4mm)
• 02ACA571: Auxiliary spindle spring for 25mm/1″ models***
• 02ACA773: Auxiliary spindle spring for 50mm/2″ models***

* Can be used on 12mm/.5 models only.
** Not available for low measuring force models.
***Required when orienting gage upside down