Starrett Attachments for 650, 651, 196 and 196M Back Plunger Dial Indicators and Universal Dial Indicators

A. Clamp

PT99437: With a 1-5/16″ (33mm) flat or round capacity 5/16″ (8mm) post (PT03709-1/2) used with PT18718 Snug.

B. Tool Post Holder

PT99438: 3/8″ x 3/4″ x 6″ (9.5 x 19 x 150mm) with upright spindle (PT03820-0) 5/16″ dia. x 4-1/2″ length (8 x 114mm). Use with PT18718 Snug.

C. Snug Complete

PT18718: Post hole has a 5/16″ diameter and 3/32-1/4″ holding capacity. Can be used on our 252 Height Transfer Gage, 57 and 257A and B Surface Gages, on 657A Magnetic Base and Swivel Post Assembly.

D. Snug Complete

PT18724: Post hole has a 3/8″ diameter (9.5mm) and 3/32-1/4″ (2.4-6.3mm) holding capacity. Can be used with our 57 and 257C and D Surface Gages or 657AA Magnetic Base with upright post.

E. Universal Snug

57S: With spindle hole diameters 5/16″, 3/8″ (8, 9.5mm) and gripping hole diameters 9/64″, 5/32″, 3/16″, 1/4″ (3.5, 4, 4.8, 6.3mm).

F. Universal Snug

58S: With spindle hole diameters 1/4″, 5/16″, 3/8″ (6.3, 8, 9.5mm). Gripping hole diameters range from 3/32-1/4″ used on holders with smaller clamp hole.

Attachments for 196 and 196M Only

G. Hole Attachment

196F: allows indicator be used over obstructions and inside holes to a depth of approximately 1-5/8″ (40mm).

H. Shock Absorbing Anvil

PT08726A

I. Split Bushing

PT00764: Allows attachment of 196 Indicator to 660 Magnetic Base.

*For more details on each item, copy the Item Number below into the search bar at the top of the page.