TESA Standard Probe 2 mm, 4,3mm bolt travel, linear travel – 03230056

• Typical qualities of TESA inductive probe: excellent repeatability, durability and longevity
• All TESA electronic probes are mounted on ball-bearings, except for miniature axial probes.
• The ball bearing guidance system is highly insensitive to radial forces exerted on the measuring bolt. An anti-rotation device ensures a perfect movement of the mechanical guiding system
• The guides of axial probes are highly protected against penetration of liquids (oil) or solids (dust) through protective bellows of elastomeric quality.
• The inserts (measuring inserts) can be replaced or exchanged. A wide choice of geometrical shapes and sizes are available
• The measuring force can be adjusted by changing the spring, depending on the probe model.

Features:

• Universal probes for standard and continual usage applications.
• Probe housing 8 mm with possibility of clamping over its entire length.
• Measuring bolt mounted on a ball bearing.
• Both the probe housing and ball-bearing guide are separate from one another, so that the measuring bolt moves easily even if the probe is not clamped appropriately.
• Degree of protection IP65 according to IEC 60529.
• Wide range of accessories including measuring inserts, spring sets, etc.
• LVDT probes compatible with measuring equipment from other makers available on request.

Specifications:

Reference 03230056 Repeatability limit, m 0,01 Measuring range, mm 2 Special characteristics Radial Maximum permissible errors, m 0,2 + 2,4 L L (BPX: 0,2 + 0,8 L) Degree of protection IP65 Short designation AXIAL PROBE GTL22 0.63N Measuring bolt retraction Vacuum Designation (Marketing doc.) GTL 22 Special characteristics 60 Mass, g 6 Execution Adjustable from -2,2 to 0,1 (factory setting -1,2) Hysteresis, m 0,02 Sealing bellows Viton EDP 29321 Measuring force, N 0,63 Range of indication, mm 4,3 Complete designation GTL 22 axial probe 2 mm; F = 0,63 N