Securpak Corner Brace Zinc Plated 75mm (10 Pack)

Heavy-Duty Internal Brackets for Reinforcing Right-Angle Wooden Joints

Product Overview

The Securpak Corner Brace Zinc Plated 75mm (10 Pack) is a robust internal bracket designed to reinforce and support 90-degree joints in woodworking, furniture assembly, and general home improvement tasks. Ideal for both structural builds and repair projects, these heavy-duty L-shaped braces help maintain joint integrity, prevent separation, and extend the life of wooden constructions.

Each brace is constructed from high-quality steel and finished with a durable zinc plating to resist corrosion and wear, making them suitable for a variety of indoor and semi-sheltered outdoor environments. With a longer 75mm arm length, these corner braces provide increased surface contact and load support compared to smaller brackets, making them perfect for medium to heavy-duty applications.

Whether you’re building new furniture, reinforcing storage units, or securing joints in a custom woodwork project, these brackets offer long-lasting, dependable performance.

Product Specifications

Product Name: Securpak Corner Brace Zinc Plated

Size: 75mm 75mm (arm length)

Material: Heavy-duty steel

Finish: Zinc-plated for corrosion resistance

Colour: Metallic silver

Design: L-shaped internal bracket for 90-degree corner reinforcement

Pack Quantity: 10 brackets

Boxed Dimensions: Width: 12.0cm Height: 24.0cm Depth: 12.0cm

Boxed Weight: 480g

Pre-drilled Holes: Yes

Screws Included: No (use appropriate wood screws)

Key Features and Benefits

Extended 75mm Size for Greater Support

The 75mm arms provide more surface area for better weight distribution and stronger joint reinforcement. Suitable for heavier structures where additional support is required.

Heavy-Duty Steel Construction

Manufactured from solid steel for strength and reliability, these brackets are built to handle regular stress and resist bending or distortion over time.

Zinc-Plated Finish

A corrosion-resistant zinc coating protects the steel from rust and moisture, making the brackets durable in indoor environments and suitable for use in covered or ventilated areas.

Pre-Drilled for Easy Installation

The pre-drilled holes allow for quick, accurate installation using standard wood screws. Ideal for time-saving on-site work or at-home projects.

Versatile Application

Suitable for use in various wood-based construction projects, including furniture building, shelving, cabinetry, and general wood joinery.

Typical Applications

Furniture Repair and Assembly Reinforce corners on tables, bed frames, cabinets, and chairs.

Shelving Support Secure brackets under or behind wall-mounted shelves and freestanding units.

Storage Construction Build or strengthen wooden boxes, crates, and custom storage solutions.

Joinery Projects Useful in timber framing, workshop builds, and home DIY constructions.

Utility Installations Support right-angle joints in tool benches, workstations, or racking systems.

Installation Instructions

Position the Brace: Fit the L-shaped brace into the internal corner of the joint, aligning both arms flush with the wood surfaces.

Mark Hole Positions: Use a pencil or marker to identify the screw hole locations.

Drill Pilot Holes (Optional): For hardwood or thicker wood, drilling small pilot holes is recommended to prevent cracking.

Secure with Screws: Use wood screws appropriate for your material (not included). Tighten evenly to ensure a flush and firm hold.

Repeat as Required: Install additional braces in other corners or opposite sides for added structural stability.

Care and Maintenance

Storage: Store unused brackets in a dry area to avoid moisture exposure.

Cleaning: Wipe clean with a dry or lightly damp cloth. Avoid using abrasive cleaners or solvents.

Inspection: Periodically inspect installed braces, especially in load-bearing applications, and retighten screws if needed.

Frequently Asked Questions (FAQs)

Q1: Are screws included in the pack?
A: No, screws are not included. Use standard wood screws suited to your specific surface and load requirements.

Q2: Can these braces be used outdoors?
A: They are zinc-plated for corrosion resistance and are suitable for indoor or sheltered outdoor use. For continuous exposure to rain or wet environments, galvanised or stainless-steel alternatives are recommended.

Q3: What materials are these compatible with?
A: Ideal for use with wood, MDF, plywood, and similar materials. Not designed for direct use on metal or plastic surfaces.

Q4: How many holes are in each bracket?
A: Each 75mm brace typically has four pre-drilled holestwo on each armfor stable and even installation.

Q5: What projects are these best suited for?
A: These are best used in medium to heavy-duty applications such as large furniture, reinforced shelving, utility builds, and repair work requiring dependable corner support.

Conclusion

The Securpak Corner Brace Zinc Plated 75mm (10 Pack) offers strong, reliable, and corrosion-resistant reinforcement for all your 90-degree woodworking needs. With their durable steel construction, larger surface coverage, and professional-grade finish, these braces are an essential component in any toolkitideal for DIYers, contractors, joiners, and furniture makers alike.

Whether you’re fixing a damaged unit or building something from scratch, these brackets ensure stability, strength, and lasting performance with every installation.