Terra Carbide Square Indexable Carbide Milling Insert, 11 Relief Angle, 1/2 I.C., 1/8 Thick – SPKN42EDR APC5
Terra Carbide Square Indexable Carbide Milling Insert, 11 Relief Angle, 1/2" I.C., 1/8" Thick - SPKN42EDR APC5 ANSI/ISO Standard Milling Inserts. APC2 -can be used on high-temp alloys at lower cutting speeds (e.g. Titanium, Inconels, etc.) Very slight hone
Categories: Brands, Hardware, Terra Carbide
Terra Carbide Square Indexable Carbide Milling Insert, 11 Relief Angle, 1/2″ I.C., 1/8″ Thick – SPKN42EDR APC5
- ANSI/ISO Standard Milling Inserts.
- APC2 -can be used on high-temp alloys at lower cutting speeds (e.g. Titanium, Inconels, etc.) Very slight honed edge.
- APC5 – can be used at slower speeds. Honed edge.
- APC5T – can be used for extended tool life on steels and stainless materials. Honed edge.
- Maximum Depth of Cut: 0.350″
- Coating: Uncoated
- ForSteel, Stainless Steel
For More Terra Carbide Indexable Carbide Milling InsertsClick Here
Reviews
There are no reviews yet.