Suburban Permanent Magnetic Chuck, Standard Pole, 18″ x 6″ – MC-618-S2

• Models with the suffix “S0, S1 or S2” are part of the SineSet System. The chucks are designed to bolt directly, with little or no indicating, to a SineSet sine plate or compound sine plate of the same size and series to form a magnetic sine plate or magnetic compound sine plate.
• Can be used alone as a parallel chuck. The 4″ x 4″, 6″ x 6″ and 9″ x 9″ models can be used as squaring chucks.
• Made with ceramic magnets for superior holding power.
• Chucks are lubricated and sealed against dirt and liquids.
• Includes handle, side and back rails.
• 12″ x 12″ models & larger have a non-removable handle.
• Made in the U.S.A.

STANDARD POLE: 1/4″ poles and 1/8″ separators produce deep flux lines for holding large and thick parts.

FINE POLE (marked -FP): 1/8″ poles and 1/8″ separators produce shallow flux lines for holding small and thin parts.

Specifications:

MODEL # POLE SPACING SineSet
SERIES LENGTH WIDTH HEIGHT SQUARE
& PARALLEL WEIGHT MC-618-S2 STANDARD S2 18″ 6″ 2-5/8″ 0.0003″ 65 lbs.

See all Suburban Permanent Magnetic Sine Plate & Squaring Chucks