Mitutoyo Holtest (Type II) Series 368 Three-Point Internal Micrometer, 200-225mm – 368-778

This is an economy version of a three-point internal micrometer, that offers you the following benefits:

• Hardened tool steel anvils and tapers allow a more economically priced and
  affordable tool.
• Individual types without setting rings or extensions.
• The Holtests (type II) have three contact points made of alloyed steel
• Measurement can be taken closer to the bottom of the blind bore
• Can measure deep holes using an Extension Rod (optional)
• With Ratchet Stop for constant force
• Setting Rings for zero point adjustment are optional
• Supplied in fitted plastic case up to 100mm / 4″. Over 100mm / 4″ supplied in wooden case

Technical Data:

• Graduation: 0.005mm or .0002″
• Measuring method: Three-point method
• Contact point: Harden Steel

Optional Accessories:

• 952621: Extension rod 150mm / 5.9″ For range 12-20mm / 0.5 – .8″ models
• 952622: Extension rod 150mm / 5.9″ For range 20-50mm / 0.8 – 2″ models
• 952623: Extension rod 150mm / 5.9″ For range 50-300mm / 2 – 12″ models

Specifications:

Range 200 – 225 mm Mass 1420 g Delivered Including box, key, certificate of inspection Graduation 0.005 mm Scale Thimble and sleeve satin chrome finish,
Up to 12 mm : 17 mm
Over 12 mm : 23 mm Measuring face hardened steel
Taper: hardened steel Measuring spindle Spindle pitch 0,5 mm Measuring method 3-point Digital/Analog Analog Inch-Metric Metric Spindle pitch Spindle pitch 0,5 mm Depth without extension 158 mm L1 227 – 252 L2 161 a 19.6 mm b 13.8 mm

See all Mitutoyo Holtest (Type II) Series 368 Three-Point Internal Micrometers